Multiple spindle oscillation mortiser YOM 3
Introduction of multiple spindle oscillation mortising machine
Feature
– This highly productive mortiser is designed for producing various mortises simultaneously.
– Flexible head combination to meet specific job requirements.
– Double tables on front and back sides, permitting both sides operations for increased efficiency.
– Cutter speeds are frequency inverter controlled, providing variable speeds change.
– The entire operation motions are conveniently controlled by simply pressing the foot switch.
– Each carriage is adjusted independently.
– Two speeds cutter oscillation permits high/low speed change.
– Carriages slide on big steel rods. High speed cutter oscillation features maximum stability.
– Mortise width and depth are adjustable.
– The machine is designed for both mortising and drilling functions.
– Carriages are well constructed for adjusting mortise width independently.
Specification
| Numbers of carriage | 3 pcs |
| Numbers of spindle | 3 – 6 spindle |
| Max. Mortise width | 100 mm |
| Max. Mortise depth | 30 mm |
| Cutter diameter | ø 6 -25 mm |
| Cutter shank diameter | ø 16 mm |
| Min. Distance between spindles | 90 mm |
| Oscillation speed (2 speed) | 95/190 |
| Spindle speed | 6000- 12000 rpm |
| Tilted motise angle | 200 |
| Spindle motor | 1.8 hp |
| Oscillation drive motor | 1 hp |
| Working air pressure | 5-6 kg/cm2 |
| Dust hood outlet diameter | ø 4” |
| Net weight | 1350 kg |
| Gross weight | 1650 kg |
| Machine dimensions | 2420 x 1380 x 1480 mm |
| Packing dimensions | 2550 x 1510 x 1680 mm |
Refer to other mortiser machines at : Mortising machine
