Features of Auto Wood Measurement And Optimizations System
- To measure and optimize before cross cutting, and the optimizing result will be showed on the screen of the control panel, or marked on the board.
- Reasonable output optimizing before cutting for the precious timber.
- Fluorescent printing on the timber about the defeats and the grades of the wood.
- Zero waste for the timber, to increase the timber utility ratio without extra investment.
- With auto-scanning device, to optimize the timber with small amount production, without extra investment for the cutting machine.
Specifications of Auto Wood Measurement And Optimizations System
| Processing length | : 300 – 7000 mm |
| Processing width | : 15 – 300 mm |
| Processing thickness | : 8 – 160 mm |
| Cross sections | : 300 x 40 mm |
| : 200 x 150 mm | |
| Feeding type(cutting area) | : Automatic transverse feeding chain |
| Optimize mode | : It optimize after measurement |
Attention: Specifications, design features and colors of the machine are subject to change without prior notice, but will not affect the function and operation of the machine.
video of
Latest Auto Wood Measurement And Optimizations System Price
If you need to update the selling price of the Auto Wood Measurement And Optimizations System, please contact:
- Email : info@quocduy.com.vn
- Hotline : 0903 600 113
- Website : www.quocduy.com.vn – www.kingwoodmac.com
Additionally, if you’re in Ho Chi Minh City, you’re welcome to visit our factory at 401 To Ngoc Van, Thanh Xuan Ward, District 12, Ho Chi Minh City to witness the operation of our modern machines firsthand.
