SURFACE SANDING MACHINE
Features
– Frame of carbon steel made up of machine.
– With adjustable rubber pressure roller (surface with grooves).
– Sanding paper change on left side.
– Rubber Endless Belt, with automatic device for feed belt tracking
– Feed speed adjustable within 3~19 m/min, and controlled by Inverter.
Specifications
C – CROSS (with segmented pad function and chevron belt) | |
Sanding paper size | : 5600 x 150mm |
Sanding paper speed | : 2-20m/giây |
Motor power | : 20HP |
– Electronic segmented PAD – Pressure beam system provide compensation workpiece tolerance compensation up to ±1 mm. – Segmented pad will adjust pressure automatically. – With rubber roller to pressure in-feed and out-feed. – Use inverter to control sanding paper speed; with two pieces air jet to cleaning cross sanding paper; pressure segment belt system; air system to tight sanding paper; the sanding paper blasting device controlled depending on workpiece. | |
Longitudinal sanding unit x 2 (with segmented pad function and chevron belt) | |
Sanding paper size | : L2620mm*W1320mm. |
Sanding paper speed | : 2~17m/s. |
Drive motor power | : 20HP (15KW). |
– Electronic segmented PAD. – Pressure beam system provide compensation workpiece tolerance compensation up to ±1 mm. – Segmented pad will adjust pressure automatically. – With rubber roller to pressure in-feed and out-feed. – Use inverter to control sanding paper speed; with one piece air jet to cleaning longitudinal sanding paper; air system to tight sanding paper; automatic compensation of differences in the belt length, sanding belt running against feed direction; the sanding paper blasting device controlled depending on workpiece. | |
Brush device | |
Brush roller height could adjustable | |
Brush material | : horse hair. |
Diameter | : 150mm. |
Drive motor power | : 2HP (1.5KW). |
– Pressure beam of electronic segment PAD – Controlled by electric rather than air pressure. Therefore, there are no pollution such as jam, un-smooth operation, uneven surface created by cylinder. | |
Pneumatic system | |
– Sanding belt with tracking cylinder. – Air compress cutout valve with lock. – Air filter F.R.L. (Filtration, Regulation, Lubricant ). – Self lubricating system for pneumatic components. | |
Feed conveyor device | |
Feed conveyor motor power | : 5HP |
Lifting device | |
Lifting motor power | : 0.5HP |
Vacuum device | |
Vacuum motor power | : 7.5HP (5.5KW). |
For safe transport of workpiece length more than 550mm in direction of feed, including vacuum system. | |
Controlled system | |
– Power supply on operate box with lockable switch. – Profession industrial control operate. – Touch screen operate with 10.4 inch. – Screen operate shown by picture and word. – Operate machine through touch screen by hand input data. – The left and right edges could setting “plus or minus” pressure data for workpiece processing. – Feed conveyor speed controlled by Inverter. – Display position number. – Starting main motor, and running automatic. – Overload relay protections on all motors. – Could monitor in screen, when sanding workpiece. – Working report (start timer / working timer/ breakdown timer). – When machine breakdown will shown by picture, alarm bell and flash light, make user to know which part is damage. |
See more: Lacquered panel sander