Auto finger joint line
Introduction of auto finger joint line
Feature
– The finger joint system is ruggedly constructed throughout for maximum rigidity and stability
– Equipped with an air reservoir to ensure stable motions of air system
– Designed for large solid wood processing companies to exploit residual timber economically
– Movable air clamps on the finger assembler provide smooth jointing without work piece fixing problems
– A transfer conveyor table located in front of the finger assembler provides convenience for work piece feeding
– All air cylinders are separately controlled for convenient operation and maintenance.
– Employs German linear motion guides on the left and right finger shaper
– Synchronized transmission for top and bottom feeding rollers for assembler
– New design w/chain feeding & pre-press unit for better joint mechanism and higher performance
Specification
A & C: TRANSFER TABLE CONVERYOR | |
Table size | 1820 mm |
Conveyor motor | 1/2HP x 2pcs |
B& D: FINGER JOINTER SHAPER MACHINE R-L | |
Max. width of table | 630 mm |
Min. length x height of workpiece | 150 x 20 mm |
Speed of finger cutter | 600 rpm ~ 60 Hz, 5400 rpm ~ 50 Hz |
Cut off saw + trimming cutter | 7.5 HP |
Finger cutter | 20 HP |
Conveyor driving motor | ½ HP |
Upper scoring saw | 1 HP x 1pc |
Lower scoring saw | 1 HP x 1pc |
Hydraulic pump | 2 HP |
E: AUTO FINGER JOINTING ASSEBLY PRESS | |
Length of working table | 6200 mm |
Length of pre-press station & Chain feeding table | 2915 mm |
Available length of workpiece | 2500 ~ 6200 mm |
Available thickness of workpiece | 20 ~ 80 mm |
Available width of workpiece | 30 ~ 150 mm |
Spindle diameter | 25.4 mm (1”) or 30 mm |
Saw diameter | 3000 rpm ~ 50 Hz |
Spindle speed | 305 mm |
Conveyor belt | 1 HP |
Chain feeding | ½ HP |
Brush wheel | ¼ HP |
Cut off saw | 3 HP |
Hydraulic pump | 5 HP |
Feeding speed | 63.8 m/min ~ 50 hz |
Air cosumption | 6 kg/cm2 |
See more:Auto finger joint machine
