To meet the specific needs of each customer, Quoc Duy introduces a new high capacity wood board jointing production line. With a modern, newly designed setup, this large-scale panel jointing line is currently being widely adopted by many businesses.
High capacity wood board jointing production process
To help you better understand the wood board jointing production line, you should first take a look at the process diagram outlining each stage of the jointing procedure. This will give you an overview of the steps involved and help you choose the most suitable machines.
Based on the wood board jointing production process, we divide it into three main stages to help you easily distinguish each step.
Stage 1: Cutting, Selecting Wood Slats & Finger Jointing
a) Cutting and selecting wood blanks
CNC CUT OFF SAW – CFS 100
Operating Principle:
The machine automatically detects the areas to be removed by reading the fluorescent chalk markings. This type of chalk is easy to find on the market, or you can also purchase it directly from Quốc Duy.
-
Maximum feeding speed: up to 80 m/min
-
Cutting frequency: over 80 cuts/min
-
High cutting accuracy with a margin of error within ±1mm
-
Operated via a touchscreen control wood board for easy adjustments
DOUBLE SIDE PLANER TAIWAN MACHINE
With the 600mm wide double-side planer, you can sand multiple wooden slats at once, depending on their size and quantity.
Set the desired thickness using a sample piece:
The cutting thickness can be easily set by placing a wooden block with the same thickness as the target product. The machine will compare it with the limit of the control knob to quickly and conveniently adjust the cutting thickness.
b) Finger jointing
This is a crucial step in the wood board jointing production line. After the vertical jointing, the slats must ensure strong adhesion and be able to withstand significant force.
Fully Automatic Finger Joint System
- The machine is specially designed to produce precise products and is an excellent solution for end-jointing. This results in high-quality, stable products, minimizing waste caused by multiple, separate processing stages.
- The use of a servo motor to replace the old drive system increases both the speed and stability of the machine.
- We have enhanced the cutting capacity by 50%.
- The improved control interface allows for easier and quicker operation.
- The automatic finger jointing system is the optimal solution for large-scale wood board jointing production lines.
Stage 2: Horizontal Lamination to Form wood board
4 Ripsaw Machines + 2 Large-Scale High-Frequency Laminating Machines
The improved high-capacity wood board jointing production line uses large-scale high-frequency laminating machines to accelerate production speed and optimize efficiency.
STRAIGHT LINE LIPSO – SA 18
To ensure the quality of the laminated wood board with perfectly straight edges and absolute adhesion, you must flatten the wood edges using a ripsaw machine with a bottom blade.
-
Maximum working thickness: 120 mm
-
Working speed: 3000 RPM
-
Feeding speed: 11 – 26 m/min
High Frequency Press Machine For Long Panel – SM 124H35
Adhesive: Both one-component and two-component adhesives can be used.
Pressing time for one wood board (from the moment the upper platen presses down until it lifts up):
-
1-3 minutes/wood board (for wood board up to 30 mm thick)
-
3-4 minutes/wood board (for wood board 30 – 75 mm thick)
-
4-5 minutes/wood board (for wood board 75 – 90 mm thick)
The machine uses a dual high-frequency wave system (self-generating – self-consuming) with high power, ensuring both efficiency and safety for the operators.
Stage 3: Cutting Finished wood board & Planing
The high capacity wood board jointing production line is equipped with a top and bottom sanding system and 2 automatic four-side cutting machines.
Standard Top Bottom Sanding Systems 0.7m – SM 700RRPTU
The wood board are quickly sanded smooth on both sides with just a single pass through the machine. This maximizes labor efficiency, enables mass production, and ensures consistent quality.
-
Processing thickness: 2 – 160 mm
-
Maximum working width: 700 mm
-
Feeding speed: 5 – 30 m/min
Four Cross Cutter – SM 4TSD
The machine automatically cuts the four edges of the wood board quickly and precisely, saving time and labor costs. The cutting edges are smooth and clean, with no chip-out, ensuring high quality.
-
Working width: 550 – 1100 mm
-
Processing thickness: up to 65 mm
-
Processing speed: 20 m/min
Consultation & Quotation for High Capacity wood board Jointing Production Line
With over 21 years of experience in consulting, designing, and installing wood processing production lines, Quoc Duy specializes in: wood board jointing lines, laminated wood production lines, industrial panel production lines, and wooden furniture production lines. We are confident in providing the best solutions tailored to each customer’s needs.
Contact us now using the information below, and the sales team will be happy to assist you with expert advice:
- Email : info@quocduy.com.vn
- Hotline : 0903 600 113