Standard top bottom sanding systems taiwan 0.6M
Introduction of standard top bottom sanding systems taiwan
Specifications
BOTTOM SANDING MACHINE 0.6 M – Model: SH – 25RPL | |||
Max. working width: | : 610 mm | ||
Max. working thickness: | : 3 – 130 mm | ||
R Spindle | Diameter | : Ø 220 | |
Motor | : 15 Hp | ||
P Spindle | P roller rear spindle rubber roller
| : Ø 130 | |
P roller rear down sanding | : Ø 110 | ||
Motor | : 10 Hp | ||
Feeding power | : 2 Hp – Frequency inerter controller | ||
Table hoist power | : ½ Hp | ||
Vacuum feeding motor | : 3 Hp | ||
Sanding belt size | : 635 x 1905 mm | ||
Thickness digital controller. | |||
Feeding operation height | : 1100 mm | ||
Pressure switch | :when air is not enough, It will Stop running auto. | ||
Pressure use pressure pad and pressure roller. | |||
Anti-explosion switch
| :When sanding belt is broken power off auto and conveyor will down auto to protect conveyor and rubber roller | ||
CONVEYOR | |||
Spindle power: | : 1/2HP Frequency inverter controller) | ||
Max. working width | : 610 mm | ||
Max. working length: | : 1500 mm | ||
Distance from feeder surface to floor | : 1100 mm | ||
TOP SANDING MACHINE 0.6 M– Model: SH – 25RP | |||
Max. working width | : 610 mm | ||
Max. working thickness | : 3 – 130 mm | ||
R Spindle | Diameter | : Ø 220 | |
Motor | : 15 Hp | ||
P Spindle | P roller rear spindle rubber roller | : Ø 130 | |
P roller rear down sanding | : Ø 110 | ||
Motor | : 10 Hp | ||
Feeding power | : 2 Hp – Frequency inerter controller | ||
Table hoist power | : ½ Hp | ||
Vacuum feeding motor | : 3 Hp | ||
Sanding belt size | : 635 x 1905 mm | ||
Thickness digital controller | |||
Feeding operation height | : 1100mm | ||
Pressure switch | :when air is not enough, It will Stop running auto. | ||
Pressure use pressure pad and pressure roller | |||
Anti-explosion switch | :When sanding belt is broken power off auto and conveyor will down auto to protect conveyor and rubber roller. |