4 side planer and moulder taiwan GS 623
Introduction of 4 side planer and moulder taiwan
Features
– Convenient infeed adjustment : The infeed table and fence are conveniently adjusted by the separate control levers
– Over height protection : In case workpiece exceeds the rated maximum height, it will be restricted by the over height protection device provided at the workpiece infeed end
– Front and rear pressure plate : The front pressure plate features “draw-back” performance, which fully avoid damage on cutters caused by an over-height workpiece.
The rear pressure plate provides extremely uniform holding pressure for outstanding parallelism accuracy of machining
– Side front pressure plate on left vertical spindle: It fully eliminates unsmooth problem when feeding short or narrow stock. The pressure plate is easy to adjust
– Convenient spindle adjustment : All control levers for the spindles are located at the front of the machine for convenient adjustment. Each spindle is provided with a mechanical digital readout, giving accurate adjustment.
Specifications
Planing width (mm) | 10 – 230 |
Planing thickness (mm) | 7 – 125 |
Min working length(mm) | 230 |
Feed speed (m/min) | 6 – 25 |
Spindle speed (rpm) | 6000 |
Spindle diameter (mm)Φ | 40 |
Adjustment of vertical spindle (mm) | 30 |
Adjustment of horizontal spindle (mm) | 20 |
First bottom horizontal spindle (mm) | Φ100 – 150 |
Right/left vertical spindle (mm) | Φ 100 – 180 |
Top horizontal spindle (mm) | Φ 100 – 180 |
Bottom horizontal spindle (HP) | 7.5 |
Right/left vertical spindle (HP) | 10 |
Top horizontal spindle (HP) | 7.5 |
Feed Motor (HP) | 3 |
Elevate Motor (HP) | 1/3 |
Table adjustment | 12 |
Infeed table length (mm) | 2000 |
Machine size (mm) | 3360 x 1280 x 1720 |
Net weight (kg) | 3200 |